The Autronic SM2 includes harness, air and water temp sensor, internal map sensor, fuel pump relay, PC data cable, calibration and data logging software, 100 page manual.
The internal map sensor is available in 1bar absolute or 4.4 bar absolute (50 psi).
Available with high current (low impedance) or low current (high impedance) injector drivers.
http://www.autronic.com
Harness has a connector which plugs into the Ecu, and has a socket for fuel pump relay.
The data cable to connect to a IBM compatible PC or Laptop plugs into a port on the ECU case.
Case Dimensions:
L = 180mm (7")
W = 200mm (8")
H = 40mm (1 1/2")
Features:
Sequential operation for 2 to 8 cylinder engines.
3D fuel and Ignition maps.
User defined up to 32 RPM and 16 Load sites = 512 sites.
Eight auxiliary outputs other than fuel pump control.
Auxiliary outputs can be defined for boost control, nitrous oxide, staged injectors, camshaft timing, AC, fan control, idle valve etc...
Traction Control.
Flat Shift. (ver 1.92 & 1.93)
Launch Control. (ver 1.93)
Anti-Lag.
Data Logging.
Available with high current drivers if required.
AutoTune option available.
Compatible with Motec Dash
